网站标志
Welcome to the official website of Guangwan Machinery Co., Ltd.

Service Hotline:

+86-18680573570

+86-18680511005

NEWS
新闻资讯
Transportation of Ice Cream Machine
Time:2018-12-25 12:18:54    Page view (411)
Tabloid:Transportation of ice cream machines:Generally speaking, there are two kinds of packaging for ice cream machine. One is pure wooden frame packaging

Transportation of ice cream machines:
Generally speaking, there are two kinds of packaging for ice cream machine. One is pure wooden frame packaging, the other is carton packaging. Whatever packaging method is used, it is for the convenience of transportation and use of the machine. Because the weight of soft ice cream machine is about 250 kg, one or two ordinary customers can not be transported, and forklift trucks will be used in regular freight stations to load and unload. However, some small freight stations do not have these equipment, they can only be handled manually, so there is potential damage to the machine in the transportation process. The most common one is the appearance of the ice cream machine collided or some scratches. This reminds customers who buy the machine that these collisions and scratches are unavoidable. Generally, they will not affect the use of the equipment itself, but serious scratches. Traces will have a certain impact on the beauty of the ice cream machine itself, which is relatively rare, just to remind you. In this case, you can negotiate with the freight forwarder or settle the claim.
_Ice cream machine handling process is not to tilt more than 30 degrees, after tilt handling to try to put for a period of time to use, mainly worried about refrigerant reflux, once the refrigerant reflux into the compressor, then it will be possible to damage the compressor of the ice cream machine at boot, this is not a quality problem - so please do not. Note that ice cream machines must not be laid flat or handled.
_The power supply requirements of ice-cream machines used in China are mostly 220V/50HZ, while those of foreign countries are 220V/60HZ or 110V/60HZ. If you want to take domestic machines to use abroad or bring foreign machines to use in China, after confirming the corresponding electrical requirements, you need to purchase the corresponding converter connection to use them. Before using the ice-cream machine, you need to buy the corresponding converter connection. The connection is connected to three plugs or directly to the air switch. When choosing the connecting plug, we should pay attention to the rated input power of the ice cream machine. Generally, the machine below 2.2KW can use 10 ampere plug (10A plug). 2.2KW-good KW can use 16 ampere plug (16A plug). So please choose 10A or 16A socket accordingly. If the socket does not match the plug, it will not be able to connect. If using less than the rated current, it will be impossible to use 10A or 16A socket. Required power wiring may lead to heating or short circuit of the power cord. If you don't know much about electricity, ask an electrician to help you with OK. In addition, ice cream machines with 380V power supply should be connected separately. Before purchasing, please make sure that your place of use can meet the wiring requirements.


Address: Guangzhou Baiyun District and Zhenjiang Ren 2 Road 133 Fozitian Industrial Zone   E-mail:sales@bejady.com

Copyright:Guangzhou Guangwan Machine Co.,Ltd

Online
Service

Online Serviceservice time:9:00-21:00

Choosing Customer Service Communication:

Hotl
ine

+86-020-86039410
Customer Service Hotline

关注
微信

关注官方微信